Categories

Hot Products

News

  • ​1. When dyeing, if the fixing and dyeing are out of synch, then it is necessary to carry out secondary dyeing, which will seriously destroy the uniformity of dyeing, and the situation often occurs...……
    Jul 27
    2018
  • ​First of all, it should be avoided that the fingers are wrapped by the enameled wire during the operation. We all know that the processing of a coil not only has the winding work, but also needs to...……
    Jul 27
    2018
  • ​The high temperature and high pressure airflow dyeing machine is a new generation of efficient, energy saving and environmentally friendly dyeing machine. After eight years of research and technical...……
    Jul 27
    2018
  • ​1. Regularly lubricate the part of the dyeing machine, as well as the friction parts and bearings. 2. For the location of the triangular tape, the overall degree of tightness should be moderate. If there...……
    Jul 27
    2018
  • ​a. Different fabrics should be placed separately and should not be mixed. b. If the vibration is caused by uneven fabric placement, immediately turn off the power switch and re-adjust the fabric...……
    Jul 27
    2018
  • ​1. Removal of oligomers, often with NaOH or acidic sulfite detergent, can also be added to the carrier to help dissolve the oligomer, adding high temperature resistant dispersant can inhibit...……
    Jul 27
    2018
  • ​(1) The same type of dye should be used for color matching to facilitate the control of the dyeing process and the simplification of the process. (2) Dyeing properties of dyes such as directness, dyeing rate...……
    Jul 27
    2018
  • ​Made of all stainless steel, the mechanical speed control has the advantages of no noise, convenient speed regulation, etc. It is suitable for seamless underwear, silk stockings, silk, etc. of hemp...……
    Jul 27
    2018
  • (1). All parts of the machine equipment should be inspected frequently, such as whether the fasteners are fastened, etc. If there is any problem, it should be dealt with in time.(2). Fabrics should be sorted...……
    Jul 27
    2018
  • A) Daily inspection: Daily protective maintenance should be carried out after eight operating hours. After the end of the day, turn off the power of the computer and the machine, vacuum the dust...……
    Jul 27
    2018
  • 1. Chemicals: The dyes must be thoroughly stirred and dissolved in the chemical tank before they can be driven into the cylinder. Otherwise, the surface of the fabric may produce color stains...……
    Jul 27
    2018
  • QR CODE
  • facebook